[Bug 86611] New: USB TO IDE Bridge stopped to work properly after kernel upgrade linux-3.12.21 -> linux-3.14.14

[b***@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=86611

Bug ID: 86611
Summary: USB TO IDE Bridge stopped to work properly after
kernel upgrade linux-3.12.21 -> linux-3.14.14
Product: IO/Storage
Version: 2.5
Kernel Version: 3.14.14, 3.16.6
Hardware: All
OS: Linux
Tree: Mainline
Status: NEW
Severity: normal
Priority: P1
Component: IDE
Assignee: ***@kernel-bugs.osdl.org
Reporter: ***@king.net.pl
Regression: No

As in summary: 058f:6390 USB to IDE bridge is not working anymore.

On linux-3.12.21 dmesg says:

[ 302.674422] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010
[ 302.674438] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001002 0 ACK
POWER sig=se0 CSC
[ 302.674464] hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
[ 302.700011] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001c03 0 ACK
POWER sig=? CSC CONNECT
[ 302.804017] hub 1-0:1.0: debounce: port 4: total 125ms stable 100ms status
0x501
[ 302.855244] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 302.855248] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 302.906018] usb 1-4: new high-speed USB device number 5 using ehci-pci
[ 305.083246] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 305.083251] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 307.272882] usb 1-4: default language 0x0409
[ 307.273507] usb 1-4: udev 5, busnum 1, minor = 4
[ 307.273511] usb 1-4: New USB device found, idVendor=058f, idProduct=6390
[ 307.273515] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 307.273518] usb 1-4: Product: USB TO IDE Bridge
[ 307.273520] usb 1-4: Manufacturer: Generic
[ 307.273627] usb 1-4: usb_probe_device
[ 307.273631] usb 1-4: configuration #1 chosen from 1 choice
[ 307.273753] usb 1-4: adding 1-4:1.0 (config #1, interface 0)
[ 307.273778] usb-storage 1-4:1.0: usb_probe_interface
[ 307.273782] usb-storage 1-4:1.0: usb_probe_interface - got id
[ 307.273785] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 307.275163] scsi9 : usb-storage 1-4:1.0
[ 307.275274] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0010
[ 329.811259] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 329.811267] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 329.862020] usb 1-4: reset high-speed USB device number 5 using ehci-pci
[ 330.017254] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 330.017259] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 330.172408] scsi 9:0:0:0: Direct-Access Generic USB Disk 9.02
PQ: 0 ANSI: 2
[ 330.172653] sd 9:0:0:0: Attached scsi generic sg6 type 0
[ 330.173648] sd 9:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465
GiB)
[ 330.174641] sd 9:0:0:0: [sdf] Write Protect is off
[ 330.174644] sd 9:0:0:0: [sdf] Mode Sense: 03 00 00 00
[ 330.176027] sd 9:0:0:0: [sdf] No Caching mode page found
[ 330.176030] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[ 330.181516] sd 9:0:0:0: [sdf] No Caching mode page found
[ 330.181520] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[ 330.204155] sdf: sdf1
[ 330.207903] sd 9:0:0:0: [sdf] No Caching mode page found
[ 330.207910] sd 9:0:0:0: [sdf] Assuming drive cache: write through
[ 330.207914] sd 9:0:0:0: [sdf] Attached SCSI disk

On 3.14.14 it says:

[ 4280.846576] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001003 0 ACK
POWER sig=se0 CSC CONNECT
[ 4280.872016] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001c03 0 ACK
POWER sig=? CSC CONNECT
[ 4281.027259] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4281.027263] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 4281.078020] usb 1-4: new high-speed USB device number 5 using ehci-pci
[ 4283.255265] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4283.255275] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 4285.446403] usb 1-4: New USB device found, idVendor=058f, idProduct=6390
[ 4285.446410] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 4285.446412] usb 1-4: Product: USB TO IDE Bridge
[ 4285.446414] usb 1-4: Manufacturer: Generic
[ 4285.446538] usb 1-4: usb_probe_device
[ 4285.446673] usb-storage 1-4:1.0: usb_probe_interface
[ 4285.446677] usb-storage 1-4:1.0: usb_probe_interface - got id
[ 4285.446681] usb-storage 1-4:1.0: USB Mass Storage device detected
[ 4285.447407] scsi9 : usb-storage 1-4:1.0
[ 4307.805273] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4307.805282] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT
[ 4307.856022] usb 1-4: reset high-speed USB device number 5 using ehci-pci
[ 4308.018268] ehci-pci 0000:00:1d.7: port 4 reset complete, port enabled
[ 4308.018273] ehci-pci 0000:00:1d.7: GetStatus port:4 status 001005 0 ACK
POWER sig=se0 PE CONNECT

And there's nothing after. I've found that on 3.14.14 scsi_probe_lun function
does not result in following output:

sd 9:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB)

which is the case for 3.12.21.

Also I tried Fedora with 3.16.6 - still USB TO IDE Bridge does not work
properly.

Some time ago 058f:6390 was quite popular and I think it would be good to have
it still supported (it is not listed as unusual device). I still have huge IDE
disks with archive storage, it would be wasteful to throw them away.

Note that other usb-storage devices (smartphones, SD card readers) work for me
properly with 3.14.14 and newer.

[b***@bugzilla.kernel.org]

https://bugzilla.kernel.org/show_bug.cgi?id=86611

Alan <***@lxorguk.ukuu.org.uk> changed:

What |Removed |Added
----------------------------------------------------------------------------
Component|IDE |USB
Assignee|***@kernel-bugs.osdl.org |***@kroah.com
Product|IO/Storage |Drivers